4*8ft Acrylic PVC Wood Cutting CNC Router With CCD Camera
Home » Products » CNC Router » CCD CNC Router Machine » 4*8ft Acrylic PVC Wood Cutting CNC Router With CCD Camera

loading

Share to:

4*8ft Acrylic PVC Wood Cutting CNC Router With CCD Camera

Cnc Router With CCD Vision Router System is among the most versatile CNC machining systems you will find on the market. The T-slot bed makes it very easy to place the sheet stock down for cutting and routing, and even setup custom jigs, fixtures and clamps for parts marking applications.

Structure:
Cutting Area:
Working Table:
Spindle:
Advantage:
Availability:
  • S2-1530CCD

  • UTECH

Multifunction CNC Router with CCD Camera System



SESAME CNC Router with CCD Camera


Based on standard SESAME CNC, added visual positioning function, equipped with a professional 1.5-megapixel industrial camera, powerful image recognition, more accurate cutting. Single system control, eliminating the switching system of the second boot, save time and effort. A set of control system with spindle engraving cutting and CCD automatic tracing-edge functions.


1300*2500*200mm

5.5kw water cooled spindle+ER25 collect

CCD visual positioning system

Aluminum T-slot table

Stepper motor&driver*4+Reducer structure*3

XY axis by 1.25M helical rack gear transmission, Z axis by Taiwan TBI ball screw

XYZ axis by Taiwan PMI 20 rail guide

Detachable structure (Two/Three sets 1325 SESAME could packed via a wood box)


5.5kw Water Cooling Spindle

The High-quality SESAME series CNC Router machine comes with a 5.5kw water-cooled high-frequency spindle. This precision spindle requires no maintenance, uses industry-standard ER25 collects, support cutter size of 3.175, 4, 6, 8, 12.7, 16mm. Fully programmable speeds from 18000 to 24000RPM.


5.5kw water cooled spindle


CCD Camera

Based on standard SESAME CNC, added visual positioning function, equipped with a professional 1.5-megapixel industrial camera, powerful image recognition, more accurate cutting. Single system control, eliminating the switching system of the second boot, save time and effort. A set of control systems with spindle engraving cutting and CCD automatic tracing-edge functions.


CCD Camera

 

UTECH Patent Type Reducer

UTECH equipment is equipped with a standard reducer structure---patented step reducer/Japan SHIMPO reducer 1:5/1:10. Compared with the reduction gear and the structure inside the gearbox, the belt of the timing belt has a certain tension and is easy to loosen. It is often necessary to change the belt. There is also a gearbox for the machine to decelerate. When the machine needs to decelerate and stop, the gearbox has no effect. Obviously, and due to the use of timing belts, great inertia is easy to slip and overtravel.

The reducer has the characteristics of low backlash, low noise, high strength, and accurate deceleration effect.


UTECH Patent Type Reducer

Control System

SESAME CCD uses Multech/Xingduowei controller, controller by computer, you can view the work path visually. Support multiple workpiece coordinate systems, access workpiece coordinate systems. Support line number processing, breakpoint continues, power continues, cycle processing.


System Operation Interface


Oil Mist Cooling System

Oil mist lubricator is driven by compressed air, sprays oil fog particles in the size between 0.5 and 15. It's applied for lubrication and cooling of lubrication points. It's equipped with an electromagnetic valve. When connected with the main unit electric control, it can realize control of lubrication time. It’s ideal for coolant tools for cutting metal. The result is higher material removal rates, improved finish, tighter tolerances, and increased productivity.


Oil Mist Cooling System


Forklift Location

The bed welding process increases the position forklift, increases the strength of the bed itself, And it’s more convenient for customers to load or unload the equipment.


Forklift Location

Dust Cover for Rail Guide and Gear Rack

The machine is designed with the dust cover for the guide rail and the helical rack and gear, to reduce friction, make the rail and the rack have a longer service life.


Dust Cover for Rail Guide&Gear Rack


Lathe Bed

The base frame is fabricated from heavy-duty tubular steel that is welded, precision machined and stress relieved so that the foundation remains true and steady over the operational life of the machine.

 

Taiwan PMI Rail Guide&High quality helical rack pinion

SESAME choose a heavy-duty linear guide rail with a high assembly Flange sliding block and PMI linear guide. The Y-axis adopts a double-row four-column guide rail, with strong bearing force, fast speed, smooth operation, high precision, and high life span.

Rack of Sesame adopts a high-precision 1.25 helical rack, which is complementary with the professional motor and professional deceleration device, which runs smoothly, high speed, high precision, and low noise.


CCD CNC Router


Automatic Edge Contour Searching Machine
------CCD CNC Router


1. Adopt heavy-duty lathe bed, square pipe welded, side hanging structure, heavy column, 150*200mm gantry, ensure the overall operation stability of the equipment.

2. The transmission model adopts a precision reducer match with brand gear rack, large torque, low noise, and high transmission precision accuracy.

3. Single system control, eliminating the switching system of the second boot, save time and effort.

4. Tracing-edge cutting for different materials, KT board, PVC, photo paper to achieve no burr cutting.

5. Equipped with a professional 1.5-megapixel industrial camera, powerful image recognition, more accurate cutting.

6. The machine supports DXF, JPG, PNG, NC, and other formats, not only with automatic tracing-edge but also support the function of the CNC router.



SESAME CNC Router's Parameters:


1
Machine Structure
Spindle+CCD Camera (oscillating knife is optional)
2
Model
UT-1325/UT-1530/UT-1632/UT-2131/UT-2141
3
Accuracy

±0.02mm

4
Table Surface Vacuum/T-slot table OR Double table
5
Frame Square pipe welding bed structure 200*300mm+150*200mm gantry
6
X, Y Structure 1.25M Helical gear rack transmission, Taiwan Linear Rail Guide
7
Z Structure Taiwan TBI Ball Screw, Taiwan Linear Rail Guide
8
Spindle Power 5.5kw water cooled spindle+ER25 cutter
9
Spindle Speed 18000-24000RPM
10
Drive Motors JMC stepper motor and driver+UTECH patent typre reducer
11
Operating System
Xingduowei/Multech controller
12
Dust Collector 2.2kw/3kw/5.5kw/7.5kw
13
Software Vectric Aspire/Type 3 /Artcam /Ucancam/JDPaint


Why Choose US?


The SESAME CNC Router's greatest advantage is machine lathe bed and legs could be split freely, accoding to customer’s request, can choose to disassemble the machine when shipping, which could save space and shipping cost. In such a severe international situation, harsh conditions such as difficulty in booking space and rising freight rates have severely hindered the transportation of goods and the normal operation and development of enterprises. SESAME’s disassembly advange would be a shining point in the near future. The UTECH team has tested and implemented many loading and unloading solutions, such as 2/3 machines to pack a same wooden box; a 20GP container to package 6 sets SESAME 1325, a 40HQ container to package 20 sets SESAME 1325, etc.

 

Before the machine leaves the factory, each machine will undergo rigorous testing. You can leave the factory only after reaching the standard, and you will get a perfect device that can be used directly. And we provide local services, such as the United States, Mexico, Peru, France, Spain, Romania and other countries.

 

As the epidemic situation is getting more and more severe today, the UTECH team will do everything possible to overcome all difficulties for you.


S2台面拆分演示图-官网S2铝型材台面尺寸图-官网

Applicable Industry


Advertising sign/logo, decoration, woodworking, building model, digital printing, and other industries.


Packing&Delivery


SESAME series machine’s lathe bed and legs support split, after dismantle, one set SESAME CNC’s package size around 10cbm (package via standard wood box); if pack via 20GP container could contain 6 sets machine. According to your needs, we will have a perfect package, loading scheme.

 

If the machine is delivered via LCL, then would be packed with wrapping film, EPE foam, and a standard export wooden box.

If the machine is delivered via FCL, then doesn't need a wood box, would be packed with wrapping film, EPE foam, and metal underframe.

CCD详情页_05

Previous: 
Next: 
///UTECH" became the company's new logo, and the company's development philosophy "Smarter Solution, Better Tomorrow.

| Quick Navigation

| Contact Information
Sofia Yi 
Whatsapp/Wechat/Tel: +86 186 6371 6521
Leave a Message
Contact us

| NewsLetter

Copyright @ 2021 Shandong U-May CNC Technology Co., Ltd. All Rights Reserved . Technology by Leadong