Worktable: | |
---|---|
Cutting thickness: | |
Drive motor: | |
Cutting speed: | |
Availability: | |
Sesame-P1
UTECH
UT-1325P
Iron Stainless Steel Plasma Cutting Machine For Copper And Aluminum
Working area: 1200*1200mm, 1300*2500mm, 1500*3000mm, 2000*4000mm etc.
Plasma power: Huayuan 63A, 100A, 120A, 160A, 200A
Hypertherm 45A, 65A, 85A, 105A, 125A
UTECH iron stainless steel copper aluminum plasma cutting machine has faster cutting speed, more precise control, smoother cutting surface, no burrs, no black edges, high cutting quality, small heat affected zone, smooth cutting seams without deformation, and does not require post-processing. It adopts Beijing START plasma control system and comes standard with a high-sensitivity arc voltage device. High-precision stepper motors and drivers ensure efficiency and precision, greatly improving stability and reliability. The robot has a humanized design and is easy to operate. High cost performance, low operating cost, high cutting efficiency, good quality and no noise. The heat-affected area is small, the cutting seam is smooth and does not deform, and no post-processing is required. This equipment is widely used for cutting stainless steel, carbon steel, alloy steel, silicon steel, spring steel, galvanized plate, pickled plate and other metal plates and tube sheets.
Description:
(1) Welded thick-walled steel structure, after special treatment, no distortion for the whole structure high precision, and long
service life time.
(2) Cutting system use Beijing Starfire system/ Start system/ FLMC-2300A or DSP system; Equipped with automatic height controller (THC controller), which can according to your material planeness, cutting head can automatically stable, and fast adjust.
(3) Taiwan HIWIN linear rail, ensure vertical section, more precision.
(4) Suitable software: Artcam/ Fastcam/ Starfire etc.
(5) FASTCAM programming software based on AutoCAD automatic programming and material system.
(6) FASTCAM is designed for all kinds of NC cutter with cutting software, the software can help the user completing various complex parts drawing, programming, material, using convenient, also bring the obvious economic benefit.
(7) If you cut thick material, according to actual use, we’ll add water tank for you for free, to absorbs a large amount of smoke generated during cutting.
(8) Machine could be customized, whatever specifications, appearance, etc. Any request you’ve, could tell us directly.
Details:
Model | UT-1325P CNC Plasma cutting machine (Other models are optional) |
Working size | 1300x2500mm (4x8ft) (Other working sizes are optional) |
Three axes repeat positioning accuracy | ±0.05mm |
Process precision | ±0.35mm |
Transmission system | X, Y: Taiwan Hiwin high-precision, zero clearance increased linear guide+ rack Z: the arc voltage control |
Max. cutting speed | 15000mm/min |
Working voltage | AC220/50HZ |
Control system | Starfire plasma cutting system Standard high sensitivity arc voltage device |
Software support | FASTCAM,AutoCAD,etc |
Instruction format | G code |
Drive system | Stepper motor |
Plasma power supply | Huayuan 63A/120A/160A/200A. Optional, USA Hypertherm, 45A/65A/85A/105A/125A |
Standard Configurations:
1) 1300*2500mm working area(1530, 2030, 2040, 2060 could be customized)
2) Beijing STARFIRE control system+Arc Height Controller
3) Huayuan 63A power supply (According to your work)
4) JMC stepper motor&driver
5) Gear rack and square rail guide transmission
6) Sawtooth table
7) Heavy duty machine body with 5mm thick square tube
8) FASTCAM software
9) Instruction of STARFIRE control system and FASTCAM software.
Optional parts:
1) Servo motor&driver(any brnad)
2) Huayuan 63A, 100A, 120A, 160A, 200A; Hypertherm 45A, 65A, 85A, 105A, 125A
3) Water tank/Water table
4) Flat table
5) Fangling control system
Etc.
CNC plasma cutting machine applications:
UTECH Iron Stainless Steel Plasma Cutting Machine For Copper And Aluminum is widely used in cutting stainless steel, carbon steel, alloy steel, silicon steel, spring steel, galvanized sheet, pickled sheet and other metal sheets and tube sheets. Widely used in steel plate blanking, chassis cabinets, sheet metal structures, metal processing, electrical switch cabinet production, textile machinery, food mechanization, kitchen utensils, lamps, automobiles, metal crafts, saw blades, electrical accessories, glasses production, etc. , aerospace, hardware products, knife measuring tools and other industries.
Iron Stainless Steel Plasma Cutting Machine For Copper And Aluminum
Working area: 1200*1200mm, 1300*2500mm, 1500*3000mm, 2000*4000mm etc.
Plasma power: Huayuan 63A, 100A, 120A, 160A, 200A
Hypertherm 45A, 65A, 85A, 105A, 125A
UTECH iron stainless steel copper aluminum plasma cutting machine has faster cutting speed, more precise control, smoother cutting surface, no burrs, no black edges, high cutting quality, small heat affected zone, smooth cutting seams without deformation, and does not require post-processing. It adopts Beijing START plasma control system and comes standard with a high-sensitivity arc voltage device. High-precision stepper motors and drivers ensure efficiency and precision, greatly improving stability and reliability. The robot has a humanized design and is easy to operate. High cost performance, low operating cost, high cutting efficiency, good quality and no noise. The heat-affected area is small, the cutting seam is smooth and does not deform, and no post-processing is required. This equipment is widely used for cutting stainless steel, carbon steel, alloy steel, silicon steel, spring steel, galvanized plate, pickled plate and other metal plates and tube sheets.
Description:
(1) Welded thick-walled steel structure, after special treatment, no distortion for the whole structure high precision, and long
service life time.
(2) Cutting system use Beijing Starfire system/ Start system/ FLMC-2300A or DSP system; Equipped with automatic height controller (THC controller), which can according to your material planeness, cutting head can automatically stable, and fast adjust.
(3) Taiwan HIWIN linear rail, ensure vertical section, more precision.
(4) Suitable software: Artcam/ Fastcam/ Starfire etc.
(5) FASTCAM programming software based on AutoCAD automatic programming and material system.
(6) FASTCAM is designed for all kinds of NC cutter with cutting software, the software can help the user completing various complex parts drawing, programming, material, using convenient, also bring the obvious economic benefit.
(7) If you cut thick material, according to actual use, we’ll add water tank for you for free, to absorbs a large amount of smoke generated during cutting.
(8) Machine could be customized, whatever specifications, appearance, etc. Any request you’ve, could tell us directly.
Details:
Model | UT-1325P CNC Plasma cutting machine (Other models are optional) |
Working size | 1300x2500mm (4x8ft) (Other working sizes are optional) |
Three axes repeat positioning accuracy | ±0.05mm |
Process precision | ±0.35mm |
Transmission system | X, Y: Taiwan Hiwin high-precision, zero clearance increased linear guide+ rack Z: the arc voltage control |
Max. cutting speed | 15000mm/min |
Working voltage | AC220/50HZ |
Control system | Starfire plasma cutting system Standard high sensitivity arc voltage device |
Software support | FASTCAM,AutoCAD,etc |
Instruction format | G code |
Drive system | Stepper motor |
Plasma power supply | Huayuan 63A/120A/160A/200A. Optional, USA Hypertherm, 45A/65A/85A/105A/125A |
Standard Configurations:
1) 1300*2500mm working area(1530, 2030, 2040, 2060 could be customized)
2) Beijing STARFIRE control system+Arc Height Controller
3) Huayuan 63A power supply (According to your work)
4) JMC stepper motor&driver
5) Gear rack and square rail guide transmission
6) Sawtooth table
7) Heavy duty machine body with 5mm thick square tube
8) FASTCAM software
9) Instruction of STARFIRE control system and FASTCAM software.
Optional parts:
1) Servo motor&driver(any brnad)
2) Huayuan 63A, 100A, 120A, 160A, 200A; Hypertherm 45A, 65A, 85A, 105A, 125A
3) Water tank/Water table
4) Flat table
5) Fangling control system
Etc.
CNC plasma cutting machine applications:
UTECH Iron Stainless Steel Plasma Cutting Machine For Copper And Aluminum is widely used in cutting stainless steel, carbon steel, alloy steel, silicon steel, spring steel, galvanized sheet, pickled sheet and other metal sheets and tube sheets. Widely used in steel plate blanking, chassis cabinets, sheet metal structures, metal processing, electrical switch cabinet production, textile machinery, food mechanization, kitchen utensils, lamps, automobiles, metal crafts, saw blades, electrical accessories, glasses production, etc. , aerospace, hardware products, knife measuring tools and other industries.