CNC wood router engraving attention to the problem

CNC wood router is an engraving machine designed specifically for customers in the woodworking industry with mass processing. CNC wood router is suitable for carving and cutting cabinet doors, artistic embossed screens, craft fan windows, and furniture and artworks. For those carved objects with irregular shapes, they seem to be tightly fixed on the surface and will shake back and forth when subjected to downward pressure. The stability of CNC wood router should be maintained during engraving, and the reasons should be paid attention to:

1. Irregular materials

2. Tool error

3. Diamond knife error

4. Reposting tape peeling

Irregular materials

The material is not standardized, you can try to put some waste under the object to increase friction. The other is to keep the packaging that comes with the item. Although the object is irregularly shaped, the packaging it carries may be very regular and easy to be fixed. Add a small strap to make an irregularly shaped object. Easy to be fixed. Or try tools to fix the regular parts, and discard the irregular parts.

Tool error

Check whether the pliers or chuck used for engraving is wrong. At the same time, the wear of the pliers or chuck of the CNC wood router will also cause the dislocation of the engraved object. If the pliers or chuck is too tight, the carved object will be ejected at the moment when the cutter's head touches the object to be carved. If the downward pressure on the engraved object is large, consider whether you must use a tapered nose. If the diamond head of the CNC wood router moves too much during the engraving process, the pressure on the side of the tool will cause the engraved object. Mobile.

Diamond knife error

The material sloshing under pressure during engraving may be due to the use of the wrong diamond knife. A 90 or 100-degree diamond knife will dig into the material, causing the material to move during the engraving process. For engraving plastic patterns, you can stick the transfer tape on the back of the engraved object, and then spray the side with the tape on the liquid spray glue, and then stick it on a surface that can be discarded, to avoid the use of double-sided tape. It leaves a surface that is difficult to clean.

Reposting tape peeling

The reposting tape is easy to peel and clean. Use a special engraved belt. One side of this belt is more viscous than the other, so the plate can be moved or replaced at will. Since the CNC wood router is often equipped with multi-functional pliers or clamps, and they are made of iron, it is easy to cause damage to the carved object or make it slip off during the engraving process, so use some rubber caps or rubber pipes. It is helpful to fix the object to be carved.

Shandong U-May CNC Technology Co., Ltd. is a new technology company focusing on machinery R&D, design, and manufacturing. It is CNC wood router products are professional and comprehensive. Prepared exclusively for customers.